Gobis Paint Silk Sheen Emulsion (Quarter size)

EZMakaan offers Gobis Paint Silk Sheen Emulsion (Quarter size) at the best price in Pakistan.

DESCRIPTION:
An economical water borne emulsion paint, has excellent coverage and smooth matt finish.

ODOR:
Odorless.
USES:
Suitable for all interior masonry, concrete, plaster and bricks surfaces. Particularly recommended for ceilings.
COMPOSITION:
Based on copolymer emulsion binder.
MIXING RATIO:
Single pack, ready to use after thinning.

COVERING CAPACITY:
14-16 m2 per litre per coat on non porous surfaces.

FILM THICKNESS:
20 to 25 microns per coat.

NUMBER OF COATS:
Two to three

DRYING TIME:
Surface Dry 30 Min. Recoat able 2 hours.
Hard dry 2 hours.

APPLICATION:
Brush, roller or conventional spray.

THINNER:
Water.

FLASH POINT:
Not applicable.

COLOR:
Wide range available, see shade card.

GLOSS:
Matt.

PACK SIZE:
0.91, 3.64, 14.56 Litres.

PROCESS AND APPLICATION

New Surface

Ensure that the surface is thoroughly dry. Allow all the afflorescent salts to diffuse to the surface until white residues do not appear on the surface. Remove all loose powder by sweeping with brush using a rubbing stone and sand paper. Apply sealing coat of Gobi’s wall sealer. Allow to dry over night. Interior surfaces should be filled with Gobi’s Sona wall putty to ensure smooth and uniform finish.

Old Surface

Thoroughly clean the surface and remove old loose paint. If the surface has been previously painted with “oil bound” distemper, white wash or any other powdery coating it should be completely scraped. Apply a sealing coat of Gobi’s wall sealer and allow to dry over night. Interior surfaces should be filled with Gobi’s Sona wall putty to ensure smooth and uniform finish.

Finishing

Stir and mix the paint to smooth consistency. Add upto 60% water to Gobi’s silk sheen emulsion and apply two to three coats. Apply by brush or roller. When applying by brush, load the brush fairly generously, apply a full even coat and do not brush out too far. When applying by roller stir the paint to a smooth consistency before pouring into the roller tray and apply freely over the surface. Clean equipment immediately after use with detergent solution / soap water.