Berger Economy Emulsion (Gallon size)

Scope:
Berger New Economy Emulsion is top quality distemper. It covers more wall area than other distempers and is therefore, very economical.

Uses:
Berger New Economy Emulsion can be used on walls, ceilings, old and new cement plasters, chipboards and hardboards.

Surface Preparation:
New surfaces should be rubbed down with stone or sandpaper to remove nibs on the plaster. Previously painted surfaces should be thoroughly sand papered. All surfaces should then be cleaned using a bristle brush or broom. Always ensure that the surface being painted is dry and free from flaking paint, oil, grease, etc.

Application Procedure:
For thinning, mix equal volume of Berger New Economy Emulsion and water. For porous surfaces additional quantity of water may be necessary for the first coat in order to satisfy surface porosity. All equipment and brushes, etc. must always be cleaned with soap and water immediately after use.

Drying Time:
Berger New Economy Emulsion dries out in half an hour and can be re-coated in 1 hour.

Coverage:
Berger New Economy Emulsion covers 12 – 16 meter square per litre per coat.

Packaging:
It is available in 3.64 litres and 14.56 litres pack sizes.